Set Up Video #1
Set Up Video #2 .1. Stand the tripod upright and pull the tripod legs apart until each leg is fully extended. 2. Slide the accessory tray over the central rod so that each arm of the tray is pushing against the inside of the tripod legs 3. Make sure mount is leveled 4. Hold the equatorial mount over the tripod head so the azimuth housing is above the metal peg 5. Push the knob located on the central rod on the underside of the tripod head upward and turn it clockwise to hold the equatorial mount firmly in place. 6. Tighten the hinges of the mount so it wouldn't move 7. Screw on counter weight rod to mount 8. Slide counter weights onto the rod and tighten them securely 9. Screw on corrector, visual backing and star diagonal onto the telescope 10. Attach telescope and tighten securely 11. Loosen the hinges of the mount that you tightened in step 6 12. Move the counterweight to a point where it balances the telescope 13. Plug in remote into hand controller hole 14. Plug in wire from declination to disc point 15. Attach to power pack
0 Comments
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2016
Categories |